Travertine is a beautiful stone that makes it an ideal stone for many types of stone works. Travertine tiles are usually installed at the neighboring tiles with some small. 1:16-inch joints. Installation of travertine So is the beauty of travertine, large joints without disturbing the natural beauty of travertine are displayed. Jointed rough and thin can also come from Travertinesanded and painted, if the smooth surface of the travertine tiles begin to dull and lifeless.
Often, travertine tiles still look good, but the Malta starts to get dirty and distracts from the beauty of travertine. Travertine grout cleaning can be difficult because you do not want to end the damage in the travertine cleaning travertine tile joints. Travertine tiles are polished or ground in order for a certain degree of reflection andI do not know that until the end of the damage during the clearing of natural travertine joints.
Like many other types of travertine stone tiles can be damaged by acids and brick mortar. You should never be any type of detergent or acid etch stop the travertine travertine. Many highly alkaline cleaners that have not been for the cleaning of tiles, mortar and stone can be developed, even boring, for the purpose of travertine. To tile cleaning more efficient on a travertineThe installation of an alkaline detergent specifically designed for cleaning are brick, mortar and stone should be used.
An alkaline detergent for cleaning of tiles, mortar and stone is made with brown dirt, grease and dirt in the joints and to respond to dirt and stains can be removed from the joints. We suggest mixing the alkaline cleaning agent with very hot water and apply it to travertine and stucco. Let the hot alkaline detergent residence time of about 20 minutes to react with allDirt, grease and dirt in the joints. Then you can rinse with a mop and bucket away the dirt from the joints.
Extremely dirty joints, you may be forced to scrub the joints with a soft pad for stirring to dissolve the dirt and grime into the joints. It 'important to use only soft sponges to clean the joints between the tiles of travertine, so as not to scratch the surface of the travertine. You can also use a vacuum suction device or similar store for helpPull out the dirty water from the travertine tiles. This way you can be sure that dirt, grease and dirt is removed and raised by travertine deposited not only in the joints when they swept the floor travetine.
It must be ensured, if all types of vac suction traverine activities. The nozzle of a plastic rigid shop vac can scratch marks when sucked down and put on a travertine floor. In addition, the plastic body vac should not be dragged on atravetine tiled floor, because this can also cause scratches on the travertine.
Steam cleaning the grout in travertine tile installation is also another option for cleaning the joints between the tiles of travertine. The steam will be deep into the porous mortar and dirt and mud extracted from the joints. Travertine is not damaged by hot steam, then with a steam cleaner this way is a sure way to clean the joints between the tiles of travertine. Steam cleaning travertine maltaThis can be a long and slow process and it is advisable to hire a professional cleaning and stone restoration company to get your travertine and grout cleaning for you. Professional machine for steam cleaning steam can clean travertine, grout and clean to get your mortar than you can ever get with stucco DIY and techniques of stone cleaning.
0 comments:
Post a Comment